RMU PLUG IN TERMINATION KITS

• Product Category: Separable Connectors
• Termination Type: Tee Connector
• Product Range: Euromold 480TB
• Bushing Interface Type: Interface C Connector
• Location: Switchgear | Transformer | Motor
• Voltage: MV HV Medium & High Voltage
• Voltage Um Class: 11kV 33kV 42kV
• Suit Cable Type: Polymeric
• Number Of Cable Cores: Single Core or 3 Core
• Cable Conductor Sizes: 35-300sqmm
• Current Rating Connector: 630 Amps/1250Amps

Part Code: Nexans Euromold K480TB/G

➡ View complete range of Joints, Terminations & Connectors MV HV

Watch Video ➡ Nexans Euromold 480TB Tee Connector Up To 42kV 630A 1250A

• Item Code: 480TB
• Production Capacity: 1000
• Delivery Time: READY STOCK
• Packaging Details: CARTON BOXES

Medium Voltage screened

• more...

  oltage	1.1 kV
  Core Type	1 Core
  Material	Epdm
  Usage/Application	GIS, RMU
  Brand	Raychem
  Model Number	RSTI-68
  Cable Insulation Diameter Range	22.4 - 42.0 mm
  Connector Cross-section Range	35 - 300 mm 2
  Maximum System Voltage	42 kV
  Continuous Current Rating	800 A
  Basic Impulse Level	200 kV
  Partial Discharge At 2 U0	< 2 pC
  AC Voltage Withstand, 5 Min	93.5 kV
  DC Voltage Withstand, 15 Min	125 kV
  Thermal Short Circuit, 1 S	55 kA
  Thermal Short Circuit, 3 S	32 kA
  Dynamic Short Circuit	125 kA

  Raychem RSTI Touch Proof Terminations are designed to connect single- and three-core polymeric cables to medium-voltage gas insulated switchgear and other equipment using CENELEC bushings Type C 1 =630 A and C 2 =1250 A, specified up to 42 kV. Made of a highly modified silicone rubber and protected by a thin walled outer conductive screen connected to earth, RSTI connectors are equally suited for indoor and outdoor installation.
  Supporting a wide application range, the design incorporates one body and two stress cone adapters to cover all cross-sections from 35 to 300 mm2. The overall and cut back dimensions are designed to take up minimum space in the terminal box. RSTI connectors are equipped with a capacitive test point for determining whether the circuit is energised. A conductive cap protects this test point.
  
  Features:
  
  • The insulation of the connector is made of a highly modified silicone rubber characterised by high tracking resistance, elongation at break and non-flammability.
  • A thin walled screen is permanently bonded onto the insulation and protects the connection system against accidental contact.
  • The screened connector need not be removed for over sheath testing.
  • The screened cable connector exceeds CENELEC HD 629.1 S2 requirements, which includes BS; VDE and other international specifications.
  • Design fits 630 A and 1250 A bushings (Interface "C 1 " and "C 2 ") as specified by EN 50180 and EN 50181.
  • The compact design supports the use of double "T" connections inside standard terminal boxes.
  • The wide application range covers cable cross sections from 35 to 300 mm2.
  • Conductor connection with mechanical, DIN or deep indentlugs.
  • Easily accessible rear plug with capacitive test point.
  • Few accessories required for system test, double "T" and earth connection.
  • Complete kit including lugs facilitates installation and storage.
  
  Design And Construction:
  
  • Screened body: A thin walled conductive outer screen is permanently bonded to the silicone rubber insulating material of the body.
  • Inner screen: A conductive inner layer, as a Faraday cage around the compression or mechanical lug, prevents corona at rated voltage.
  • Compression or mechanical lugs: Specially designed DIN and deep indent compression lugs, as well as tinned, mechanical lugs with shear bolts for connecting either aluminium or copper conductor cables.
  • ap: Electrical screen and protection of the rear end of the separable connector.

• Item Code: RSTI6855
• Production Capacity: 200
• Delivery Time: READY
• Packaging Details: CATON BOXES

Medium Voltage screened separable connectors for switchgears. Raychem developed screened separable connectors for switchgears which are compact and space saving, having high degree of reliability and safety. These terminations are designed, developed, and tested upto 36 kV for almost all sizes of cables. Switchgear terminations are either OUTER CONE type (suitable for bushings as per EN 50181 for Type A (250 Amps), B (400 Amps), C (630/800 & 1250 Amps)) or INNER CONE type Size 2 (800 Amps) and Size 3 (1250 Amps). Screened separable connectors conform to IEEE bushings and terminations to CENELEC HD 629.1 and IS 13573-2 standards.
RRL’s Screened, Separable Connection System RSTI-Large for Large Cross Sections 1250 A up to 42kV RSTI screened separable connectors are designed to connect single and three-core polymeric cables to medium-voltage gas insulated switchgear and other equipment. RSTI Screened Coupling Connections System 800A up to 42kV The screened coupling connector is designed to connect with the rear end of the base screened connector system RSTI designed for 42kV. RSTI Screened, Separable Connection System 800A up to 42kV RSTI screened separable connectors are designed to connect single and three-core polymeric cables to medium-voltage gas insulated switchgear and other equipment. RSTI Screened, Separable, Coupling System 800 A up to 33kV The screened coupling connector is designed to connect with the rear end of the base screened connector system RSTI designed for 33kV.

• Outer Cone - Angled prefabricated shielded adapter made of silicone rubber or EPDM, does not require heat during installation
• Integrated stress control Separate termination not required Stress Control – Geometrical, Refractive or Impedance type
• Test point for capacitive voltage measurement
• more...

• Item Code: ELBC833
• Production Capacity: 1000
• Delivery Time: READY STOCK
• Packaging Details: CARTON BOXES