Indoswiss Electricals & Enterprises

We are glad to mention that we are supplying 3M Indoor Termination kits all over Tamilnadu  

.MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: HS
• Production Capacity: 10000
• Delivery Time: READY STOCK
• Packaging Details: CARTON BOXES

We are glad to mention that we are supplying Indoor Termination Kits all over South India   .

Additional Information:

• Item Code: MHO-33KV
• Production Capacity: 500
• Delivery Time: READY STOCK
• Packaging Details: CARTON BOXES

We are glad to mention that we are supplying Heat Shrinkable Joints all over South india 

  .MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MXS
• Production Capacity: 200
• Delivery Time: READYSTOCK
• Packaging Details: CARTON BOXES

MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MXI
• Production Capacity: 10000
• Delivery Time: READY STOCK
• Packaging Details: CARTOB BOXES

We are glad to mention that we are supplying Electrical Cable Joints all over South india   .

Additional Information:

• Item Code: MX0
• Production Capacity: 600
• Delivery Time: READY
• Packaging Details: CARTON BOXES

3M Cable Jointing Kits are available for tape/wire shielded, armored/ unarmoured medium voltage single core and three core polymeric cables. 3M Heat Shrinkable joint utilizes a unique high dielectric constant (High K) stress control tube and mastic for effective grading of electrical stresses. The stress control tube together with the insulating and dual walled (inside insulating & outside semiconducting) tubes forms the splice body.

All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
All the grounding connections are solder-less.

Features:

• Available for 1-Core and 3-Core polymeric cables
• Provides excellent environmental protection and moisture sealing
• Wide conductor size ranges upto 1000 mm²

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready stock
• Packaging Details: Ctn

We are glad to mention that we are supplying 3M 11kv Outdoor Termination Kits all over Tamilnadu  .

MV Heat Shrink Cable Termination Kits

• 3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Production Capacity: 1000
• Delivery Time: Ready Stock
• Packaging Details: ctn

MV Heat Shrink Cable Termination Kits

• 3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Production Capacity: 100000
• Delivery Time: Ready stock
• Packaging Details: CTN

MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MHO
• Production Capacity: 5000
• Delivery Time: READY STOCK
• Packaging Details: CARTON BOX

MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MHS-3M
• Production Capacity: 500
• Delivery Time: READY STOCK
• Packaging Details: CARTON BOX

MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: 3MMHI
• Production Capacity: 500
• Delivery Time: READY STOCK
• Packaging Details: CARTON BOXES

MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MHI3M
• Production Capacity: 500
• Delivery Time: READY STOCK
• Packaging Details: CARTON BOXES

MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MHO3M
• Production Capacity: 500
• Delivery Time: READY
• Packaging Details: CARTON BOXES

We are glad to mention that we are supplying Cable Jointing Kits all over South India   
.MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: 3MMHS
• Production Capacity: 500
• Delivery Time: READY STOCK
• Packaging Details: CARTON BOXES

The 3M 33KV Outdoor Termination Kit is designed for high-voltage applications, offering reliable electrical connections.


Types of Termination Kits

- Heat Shrinkable Termination Kit: Designed for outdoor use, these kits provide excellent electrical insulation and mechanical strength.
They're suitable for 33kV power cables with XLPE insulation.
- Cold Shrink Termination Kit: These kits offer easy installation and reliable performance, suitable for both indoor and outdoor applications. They're designed for 33kV single-core polymeric power cable systems.

Product Details

- Voltage Rating: 33kV
- Cable Size: Available for various cable sizes, including 300-400 sq mm, 240 sq mm, and 185-400 sq mm



- Material: Heat shrinkable or cold shrink silicone rubber

- Application: Suitable for outdoor and indoor applications, including switchgear, transformers, and poles

Additional Information:

• Item Code: MHSO
• Production Capacity: 10000
• Delivery Time: READY
• Packaging Details: CARTON BOXES

We are glad to mention that we are supplying 3M outdoor Termination kits all over Tamilnadu   .

Additional Information:

• Production Capacity: 100

3M Cable Jointing Kits are available for tape/wire shielded, armored/ unarmoured medium voltage single core and three core polymeric cables. 3M Heat Shrinkable joint utilizes a unique high dielectric constant (High K) stress control tube and mastic for effective grading of electrical stresses. The stress control tube together with the insulating and dual walled (inside insulating & outside semiconducting) tubes forms the splice body.

All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
All the grounding connections are solder-less.

Features:

• Available for 1-Core and 3-Core polymeric cables
• Provides excellent environmental protection and moisture sealing
• Wide conductor size ranges upto 1000 mm²

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready stock
• Packaging Details: ctn

MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MHS
• Production Capacity: 500
• Delivery Time: READY
• Packaging Details: CARTON BOXES

3M 33kV Cable Jointing Kits are designed for high-voltage applications, offering reliable electrical connections. 


Types of 3M 33kV Cable Jointing Kits:


- Heat Shrinkable Kits: These kits use heat shrinkable tubing, mastics, and other accessories to create a complete cable joint. They're suitable for voltages up to 33kV and offer excellent insulating and sealing performance.
- Straight Through Joint Kits: Designed for joining two cables, these kits provide a reliable and efficient connection.
- Indoor and Outdoor Kits: Available for both indoor and outdoor applications, these kits ensure safe and durable connections.

Key Features:
- Reliable Performance: 3M cable jointing kits offer high withstand capability against voltage surges and excellent electrical insulation.


- Easy Installation: Heat shrinkable kits provide quick and easy installation, reducing labor costs and time.


- Environmental Sealing: Specially developed sealants provide protection against environmental factors, including moisture and chemicals.

Specifications:

- Voltage Range: 33kV

- Conductor Size: 95-400 (link unavailable)

- Core Type: Single core or 3 core

- Application: Indoor, outdoor, and industrial applications

Additional Information:

• Production Capacity: 100000
• Delivery Time: Ready stock
• Packaging Details: ctn

We are glad to mention that we are supplying Straight Through Jointing Kits all over TamMV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

ilnadu  .

Additional Information:

• Item Code: MHS3MHS
• Production Capacity: 200
• Delivery Time: READY STOCK
• Packaging Details: CARTOB BOXES

MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MHSX
• Production Capacity: 500
• Delivery Time: READY
• Packaging Details: CARTON BOXES

MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MHS3M
• Production Capacity: 500
• Delivery Time: READY STOCK
• Packaging Details: CARTON BOXES

3M Cable Jointing Kits are available in various types and voltage ratings, including :

- Types of Kits:

    - Heat Shrinkable Kits: Suitable for medium voltage cable power accessories, these kits provide reliable electrical connections and environmental sealing.

    - Cold Shrink Kits: Designed for indoor and outdoor applications, these kits offer flexibility and ease of installation.

- Voltage Ratings:

    - Low Voltage: Up to 1.1 kV, suitable for general industrial applications.

    - Medium Voltage: 11 kV to 33 kV, ideal for power distribution and transmission systems.

    - High Voltage: Up to 66 kV, designed for high-voltage applications in industries like construction, mining, and industrial settings.

- Key Features:
    - Easy Installation: Designed for quick and simple installation, reducing downtime and labor costs.
    - Waterproof and Durable: Kits are built to withstand harsh environmental conditions, ensuring reliable performance and longevity.
    - High-Quality Materials: Made from premium materials, these kits provide excellent electrical insulation and mechanical strength.
- Applications:
    - Industrial: Suitable for various industrial applications, including manufacturing, processing, and production facilities.

    - Construction: Ideal for construction projects, including building electrical infrastructure and power distribution systems.

    - Mining: Designed for mining applications, where high-voltage equipment and reliable electrical connections are crucial.

 

Features:

One part joint body

100% tested after manufacture

No heat required

Tool free installation

Permanent radial pressure

Suitable for paper and polymeric cables

Compatible with compression and mechanical connectors

Low temperature installation

Provides consistent installation quality

MV Heat Shrink Cable Jointing Kits

• 3M Heat Shrink MV Splice Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

  Kit Components

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
  • Steel Canister to be wrapped over the joints

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MXO
• Production Capacity: 500
• Delivery Time: READY
• Packaging Details: CARTON BOXES

MV Heat Shrink Cable Termination Kits

• 3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MHS3
• Production Capacity: 200
• Delivery Time: READY STOCK
• Packaging Details: CARTONBOXES

MV Heat Shrink Cable Termination Kits

• 3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.

  All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

  • Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
  • Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
  • Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
  • Lugs to provide high-performance connections.
  • Cleaning Solvent Pouches to clean the XLPE insulation surface.
  • Worm Clips to ensure good electrical connection.
  • Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
  • Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
  • Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
  • Ferrules to protect against damage, splitting or wear.
  • Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
  • Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
  • Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.

  Specifications

  • Quick Cable Preparation
  • Suitable for all types of conductors and connection shapes
  • Environmental sealing by specially developed sealants
  • Effective and reliable stress control
  • Compact dimensions
  • Immediate energisation possible

Additional Information:

• Item Code: MXSO
• Production Capacity: 1000
• Delivery Time: READY
• Packaging Details: CARTON

3M 33kV termination kits are designed for high-voltage applications, offering reliable electrical connections. 



Key Features:


- Heat shrinkable design for easy installation
- Excellent electrical insulation and mechanical strength

- Water-resistant and environmentally sealed system
- Suitable for extreme weather conditions and polluted areas
- Flame retardant and halogen-free options available

Types of Termination Kits:

- Heat Shrinkable Kits: designed for indoor and outdoor applications, these kits provide reliable electrical connections

- Cold Shrink Kits: offer easy installation without heat, suitable for indoor and outdoor applications